Craftsman 358.795700 Manual do Operador

Operator's ManualI CRRFTSMRN°I19cc/1.2 cu. in. 2-CycleGASOLINE HEDGE TRIMMERModel No.358.795700 - 18" BladeWARNING:Read and follow all Safet

,_ WARNING: Perform the followingsteps after each use:• Allow engine to cool, and secure theunit before storing or transporting.• Store unit and fuel

TROUBLESHOOTING TABLEWARNING: Always stop unit and disconnect spark plug before perform-ing all of the recommended remedies below except remedies that

any emissions related part on your en-gine (as listed under Emissions ControlWarranty Parts List) is defective or a de-fect in the materials or workma

Warranty Statement 2 Storage 10Safety Rules 2 Troubleshooting Table 11Assembly 4 Emissions Statement 11Operation 5 Parts List 13Maintenance 7 Spanish

Bladescanthrowobjectsviolently.•Youcanbeblindedorinjured.•Wearsafetyglasses.GlassesBootsHAZARDZONE_ ..._ & WARNING:Hazardzoneforthrowno

• Keepthecuttingbladeandairventsfreefromdebris.• Useonlyforjobsexplainedinthismanual.MAINTAINYOURUNITPROPERLY• Haveallmaintenanceandservicenotexplaine

KNOWYOURHEDGETRIMMERREADTHISOPERATOR'SMANUALANDSAFETYRULESBEFOREOPERATINGYOURUNIT.Comparetheillustrationswithyourunittofamiliarizeyourselfwiththe

OPERATING POSITION_ EyeProtection€ t_LX,k._/STOPPING YOUR ENGINE• To stop the engine, move the ON/OFFswitch to the OFF position.BEFORE STARTING THE EN

tion, move the choke lever to theHALF CHOKE position and pull therope until engine runs, but no morethan 6 pulls.STARTING A WARM ENGINE1. Move the ON/

Adirtyairfilterdecreasesengineper-formanceandincreasesfuelconsump-tionandharmfulemissions.Alwayscleanafterevery5hoursofoperation.1.Cleanthecoverandthe

Initial Settings1. Turn both mixture screws (L and H)counterclockwise until they stop.2. Turn the idle speed screw clockwiseuntil it stops. Now turn c