Craftsman CompuCarve 133.217540 Instruções de Operação descarregar pdf (Página 86)

CarveWright Designer Software Manual

Depth Prole

A Depth Prole may be applied to a gure in order to produce an effect similar to a hand-applied carving stroke.

Select the desired elements on the board then press the Select Depth Prole button in the Carving Toolbar. A

dialog will open showing the available proles. The proles on the left are created with a haft inch V bit. The

proles on the right are created with a haft inch ball nose. Reverse cut changes the direction of the cut. The

depth input is the depth at the deepest point and the max depth that can be set is .5 inches. Select the desired

prole, enter a depth and press OK.

Figure 9�7� Select Depth Prole Dialog

Once a prole has been applied the depth may be changed in the Depth Entry Box on the Input Toolbar. If you

chose a Depth Prole that is not symmetric, and the resulting cut appears in the opposite direction than what

you desired, you may select the ‘Reverse Cut’ option from the ‘Tools’ toolbar or right-clck and choose the

option from the context menu.

Any Depth Prole with a midpoint or leaf will insert a special sectional vertex controlling its location which is

editable by means of the Rout tool.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 218 219

Sem comentários

Craftsman CompuCarve 133.217540 Instruções de Operação Página 86